At flying sites where noise from models may be an issue, E-flite has the perfect answer with this high performance outrunner motor. It is an especially good match for the E-flite Brio10 for high speed F3A precision or artistic aerobatics.

Featuring high quality construction with a ball bearing supported hardened steel shaft and slotted 12-pole design, it makes an ideal choice for pilots who are thinking about electric flight but may be worried about a lack of performance.

The Power 10BL motor is a smooth running, quiet, high performance alternative to .10size glow engines, and powerful enough to power models weighing 32-48 ounce (910 to 1360gm) airplanes, and its ideal for 3D models 28-36 ounce (790 to 1020gm) or any other small electric model requiring up to 375 watts of power.

This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensures that there is maximum current flow to maximise performance. The external radial rotor design of this motor means the 5mm shaft can be easily reversed for alternative motor installations, and a complete set of mounting hardware and aluminium motor mount is included.

Specification:
Diameter:  1.4 inch (35mm)
Case length:  1.6 inch (42mm)
Weight:  4.3 oz (122g)
KV:  1100Kv
Shaft diameter:  .2 inch (5mm)
Continuous current:  30Amp
Maximum burst current:  38Amp 15 seconds
Controller:  35-40 Amp brushless required
Prop:  10x5-12x6
Cells:  2 -3S Li-Po or 6-10 cell Ni-Mh/Ni-Cad