EVERYTHING TO RUN EXCEPT FUEL AND 2 STROKE OIL  

The open bodyshell with the metal roll cage as well as the gigantic rims with low-profile knobbed tires give the Baja Buggy its unmistakable striking looks. The model is based on the 1:6 Marder chassis from which most of the chassis parts have been applied. Of course driving fun has top priority just the same as with all our 1:6 Off-Road models.

The Baja Buggy is built on a 4mm angled alloy chassis. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. Double wishbones at front and rear axle as well as 4 oil-pressure shock absorbers guarantee an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. According to side rails the underneath of the model is almost closed and therefore the chassis parts are protected against dirt.

The model is equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.

Please note radio installation requires some minor drilling.

Additional Items included, but not installed.
Spektrum DX2.0 Radio and receiver
Hitec Throttle Servo
Futaba Steering Servo
3300mah 6v RX Battery and Charger
100mm Extn Lead

Items Required 
Petrol/2 Stroke Oil 
Bodyshell is supplied clear, own paint is required.