|
The BEAST is here!!! Designed by aerobatic world champion Quique Somenzini, the Ultra Micro eXtreme (UMX) Beast® is a thrilling small-scale recreation of one of the most awe inspiring airplanes on the airshow circuit today. And, like the full-scale Beast, it delivers high-powered aerobatic excitement that will put a grin on the face of any intermediate to experienced RC pilot. At the heart of its phenomenal performance is a brushless motor, propeller and battery combination that delivers a spine-tingling thrust-to-weight ratio. This incredible power output, combined with its well-balanced controls and carbon reinforced wing, allow the UMXTM Beast to achieve a level of precision and performance that has more in common with its giant-scale Hangar 9® twin than any ultra micro you've flown before. The UMX Beast BNF comes completely assembled with a BL180 brushless outrunner motor and Spektrum AR6400LBL Ultra Micro DSM2 Receiver/BL ESC installed. Built-in long-throw servos on the AR6400LBL drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 2S 7.4V 120mAh 20C Li-Po battery and DC Li-Po charger are also included. Product Specifications| Wingspan: | 14.7 in (374mm) | | Overall Length: | 15.7 in (400mm) | | Wing Area: | 83.8 sq in (5.40 sq dm) | | Flying Weight: | 2.36 oz (67g) | | Motor Size: | 180BL Brushless Outrunner, 2300Kv (included) | | Radio: | AR6400LBL 6CH Brushless ESC Receiver (included) | | Trim Scheme Colors: | Black, Red, Gold | | CG (center of gravity): | 18mm from Leading Edge of Bottom Wing | | Prop Size: | 5 x 2.75 in (127mm x 70mm) | | Recommended Battery: | 2S 7.4V 120mAh Li-Po (included) | | Aileron: | Yes | | Elevator: | Yes | | Rudder: | Yes | | Throttle: | Yes | | Flaps: | No | | Retracts: | No | | Approx. Flying Duration: | 5 minutes | | Scale: | Ultra Micro | | Charger: | Celectra 2S 7.4V DC Li-Po Charger (included) | | Steering: | Yes | | Experience Level: | Intermediate | | Recommended Environment: | Indoor/Outdoor | | Is Assembly Required: | No |
Needed to CompleteA 4+ Channel DSM2 Transmitter (with Dual Rates and Exponential programming recommended) |
|
