At flying sites where noise from models may be an issue, E-flite has the perfect answer with this high performance outrunner motor. Featuring high quality construction with a ball bearing supported hardened steel shaft and slotted 12-pole design, it makes an ideal choice for pilots who are thinking about electric flight but may be worried about a lack of performance. The Power 15BL motor is a smooth running, quiet, high performance alternative to .15size glow engines, and powerful enough to power models weighing 32-56 ounce (1020 to 1590gm) airplanes, and its ideal for 3D models of 32 to 40 ounce (910 to 1135gm) or any
other small electric model requiring up to 425 watts of power. This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensures that there is maximum current flow to maximise performance. The external radial rotor design of this motor means the 5mm shaft can be easily reversed for alternative motor installations, and a complete set of mounting hardware and aluminium motor mount is included.

Specification:
Diameter: 1.4 inch (35mm)
Case length: 1.9 inch (50mm)
Weight: 5.4 oz (152g)
KV: 950Kv
Shaft diameter: .2 inch (5mm)
Continuous current: 34Amp
Maximum burst current: 42Amp 15 seconds
Controller: 40 to 45 Amp brushless required
Prop: 10x6-13x6.5
Cells: 3-4S Li-Po or 8-12 cell Ni-Mh/Ni-Cad