- Full Composite Construction
- Aluminum tube for wings/stabiliser spar
- Two pieces wing/stabiliser
- External painted scheme
- Removable wing/stabilizer/vertical fin
- Servo extension wire included
- CG checking plate include. Easy to check the CG yourself.
- 3000ml fuel tank and fuel tube included. Option to add extra 3000ml fuel tank.
- Preinstall tube for servo extension wire
- Hardware included
- Dual wall tail pipe(Diameter:105mm) for 8-30kg turbine included.
- Normal flight turbine size: 8-16kg(80-160N) thrust, 3D flight turbine size: 18-26kg(180-260N) thrust
- High quality Aluminium Air Trap(UAT for 8-22kg turbine) included.
- Fuel dot and fuel tank vent with startup overflow fitting included
- One servo for each flap , one servo for each aileron,one servos for rudder. one servo for each elevator, one servo for nose wheel. all use standard size servo.
- Option to install vector thrust pipe for 3D flight.
- Strong electric retract landing gear with ABS electric brake.
- Option for Navigation LED lights with programmer and Wiring
- All the control horn preinstall and paint. No need the glue to finish predator jet.
Aileron: 17mm, Rudder: 25mm, Elevator: 13mm. Flap: 46mm for take off and 78mm for landing.
The CG is 283mm from the front leading edge on the root of the wing.
|Wingspan:||80.8 in(2.0M) |
|Wing Area:|| - |
|Fuselage length:||90 in(2.28M) |
|Weight:||10.8kg(23.76lbs) with jetsmunt M100 turbine |
|Engine:||8-26kg thrust turbine required (not Included)|