Features (T-Rex 600N LTD)
1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-14° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Highly efficient shaft driven tail design.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New flybar paddles feature light weight and sports.
21.New flybar control set design.
22.New tail boom supports.

Specifications (T-Rex 600 LTD)
Length:1160mm
Height:410mm
Main blade length:600mm
Main rotor diameter:1350mm
Tail rotor diameter:240mm
Engine pinion gear:20T
Autorotation tail drive gear:180T
Drive gear ratio:8.5:1:4.5(E:M:T)
Flying weight:Approx. 3200g

Included in the kit (T-Rex 600 LTD)
T-REX 600 Nitro kits setX1 set
600D Carbon fiber bladeX1
DS610 Digital servoX1
GP750 Head lock gyro comboX1
2 In 1 voltage regulator comboX1
RCE-G600 GovernorX1

Eequipment required for complete:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Standard servoX1
Align 50 engineX1
50 MufflerX1
Pitch gaugeX1
Super starterX1
Engine fuelX1
Fuel pumpX1

Align 3G Programmable Flybarless System

3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.

Features:

• Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
• 12 bit processors providing ultra high resolution, resulting in highly precise controls
• Software upgradable through PC interface adapter
  (sold separately)
• Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
• Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
• Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
• Suitable for all CCPM and mechanical mixing system.
• Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
• Innovative Pitch Gau as an aid to facilitate pitch adjustments.
• High frame rate signal output for faster and higher precision servo response.
• Capable to operate between 4.5V to 8.4V, compatible with high voltage servos.
• Small footprint, light weight, minimalists and reliable design.

Specifications
Suitable Voltage Range: DC11.1-22.2V 3-6cell Li-Po
Flip and Roll rate detection speed: :±300degrees/sec
Rudder rate detection speed:±500degrees/sec
Sensor resolution: 12bit
Operating temperatur:-20℃~65℃
Operating humidity:0%~95%
RoHS certified
Dimension:
Control box:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
Weight: Control box:16g Sensor:9g

Included in Kit (flybarless Sysytem)
Main Rotor head Set x1
Flybarless control unit x1
Flybarless Sensor x1
Head Stopper x1
F servo horns x3
Main Rotor head Set x1
Linkage ball A x2
Sensor mounting foam x2
Signal extension wire 100mm x1
Signal extension wire 220mm x1
Pitch Gauge x1
Mixing base assembly x1
Screw bag x1
Linkage rod A x2