Key Features

• Exceptionally strong and lightweight Carbon-Z airframe
• High-performance prop optimized for precision and 3D flying
• High-output 25-size brushless power system installed
• E-flite 60A Pro brushless ESC installed
• Spektrum 6-Channel AR600 DSM2 receiver installed
• Digital high-speed metal gear servos installed
• 4S 2800mAh 14.8V 30C Li-Po battery included
• 4S variable rate DC Li-Po balancing charger included
• Low friction carbon rod hinges
• Replaceable wings, stab, landing gear and control surfaces
• Quickly disassembles for transport or storage in this box
• Requires a full range DSM2 aircraft system (sold separately)

Overview

The Carbon-Z^TM Yak 54 is a quantum leap in unlimited aircraft design that uses patent pending Carbon-Z construction. Carbon-Z is as strong and light as wood and gives the Yak 54 the kind of rigidity that allows it to fly with the energy and precision of a larger scale model. The brainchild of world aerobatic champion, Quique Somenzini, it comes out of the box equipped with a customized high-output brushless power system and digital high-speed servos. The combination of these high-performance components with the light weight and superb rigidity of the Carbon-Z airframe result in a 3D airplane with a 2:1 thrust-to-weight ratio that knows no limits.

Best of all, you can have this Bind-N-Fly® version flying in as little time as it takes to charge its battery and bind the receiver to a full-range DSM2 aircraft transmitter. To get the most from the Carbon-Z Yak 54, a programmable DSM2 aircraft transmitter with dual rates and exponential function is recommended.

Needed to Complete

A full range DSM2 compatible aircraft transmitter (with programming capabilities highly recommended)

Specs

Wingspan:	48.0 in (1220mm)
Overall Length:	48.5 in (1230mm)
Wing Area:	525 sq in (34.0 sq dm)
Flying Weight:	3.75-3.80 lbs (1.70-1.73kg)
Motor Size:	25-size 1,000Kv Brushless Outrunner (included)
Radio:	6+ Channel Transmitter (AR600 included)
Trim Scheme Colors:	Red Pantone 185C, Blue Pantone 286C
CG (center of gravity):	At wing tip, 6 inches (153mm) forward from the aileron trailing edge
Wing Loading:	16.2 oz/sq foot (50.1 grams/sq dm)
Prop Size:	12 x 5.25 (305 x 133mm) (included)
Spinner Size:	1.57 in (40mm)
Speed Control :	60-Amp Pro Switch-Mode BEC Brushless (included)
Recommended Battery:	2,800mAh 4S 14.8V LiPo (included)
Flaps:	No
Retracts:	No
Control Throw (Ailerons):	Low: 30mm, High: 65-70mm up/down at aileron root
Control Throw (Elevator):	Low: 15mm, High: 48-50mm up/down at counter balance leading edge
Control Throw (Rudder):	Low: 45mm, High: 65mm right/left at counter balance leading edge
Approx. Flying Duration:	5 minutes
Charger:	4S variable rate DC Li-Po balancing charger (included)
Minimum Age Recommendation:	14 years
Experience Level:	Intermediate
Recommended Environment:	Outdoor
Assembly Time:	Less than 1 Hour
Is Assembly Required:	Yes