The RC-D100V2, is adapted to a full range of chemistries (LiPo, LiFe, LiIon, NiMH, NiCd and PB) and comes with a comprehensive set of leads making it fully-prepared for practically any battery type. It is capable of operating as a power supply, with the maximum output of 100W to help hobbyists power their DC equipment. This charger is specially designed to cater for the higher end user, but with the aid of a simple-to-use interface and a complete set of instructions, this charger is by no means limited to experts.
PEASE NOTE: This Charger comes with 2 XT60 charge leads and 2 x blank charge leads (so you can solder you own connectors onto it.) Other charge leads are available to purchase separately.
This charger features:
► Voice Guide: makes the charger more user-friendly and customizable.
► Two independent charging circuits (dual 2x100W output on DC (or with power supply) and 100W can be distributed across 2 channels on AC)
► DC Power Supply: can supply 100W/13.8V DC power, allowing hobbyists to power equipment on the field.
► Terminal voltage control
► Re-Peak mode for NiMH/NiCD batteries
► Battery meter
► Battery internal resistance meter
► PC communications
► ‘Scan to go’ function via ChargerTracker V2 app: create QR codes that save and load the charging setting for you batteries.
|Input||AC / DC|
|Charge Power||2x 100W (two channel)|
|Discharge Power||2x 10W (two channel)|
|Charge Current||0.1 – 10A|
|Discharge Current||0.1 – 5A|
|Compatible Chemistries||NiMH / NiCd / LiPo / LiFe / LiIon / LiHV / PB|
|Lithium Cell Count||1 – 6S|
|NiMH / NiCd Cell Count||1 – 15S|
|PB Cell Count||2 – 20V|