Pilot-RC Trainer V2 90in (2.29M) White/Carbon/Blue

£389.00

SKU: PIL698 Category:

Availability: Out of stock

The ideal way to get into model flying. An easy to fly, easy to build and even easy to repair high wing box construction trainer.

Ignore noisy dirty and expensive to run glow engines and start with a 20-30cc gas engine, this allows both a more stable and bettery flying plane, as well as providing you with valid equipment for when you are ready to move up to any other style of flying!

Our V2 version comes much improved for an even more enjoyable learning process.

INCLUDED HARDWARE
Complete air frame with all basic accessories (such as carbon fibre main undercarriage, aluminium wing-tube, fibreglass control horns and hinges)
Fuel tank, fuel tubing pre-prepared and fuel dot
Wheels and axels
Pushrods with ball links
Plastic spinner included
Servo extension wires included

REQUIRED HARDWARE (NOT SUPPLIED)
Motor: 20-35cc or equivalent electric
Servos: 4 plus throttle // Uses x2 per aileron, x1 for elevator and x1 for rudder (optional +2 for flaps if used)

*Please note that the servo slots are designed to accept a medium size servo (35mm x 15mm) however the wood has been prepared and marked, should you wish to enlarge in order to accept standard size servos.

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, and possibly other small accessories.

RECOMMENDED HARDWARE (NOT SUPPLIED)
Servos: 4 x MacGregor MG2810HV 10.0Kg/0.07s High Voltage Servos or 4 x MacGregor MG5921HV 20.3Kg.cm/0.12s High Voltage Servos Plus 2 additional if using flaps (Optional)
Servo arms: Pilot-RC 1.2in Aluminium arms (25T – Futaba) Plus 2 additional if using flaps (Optional)
Wingbags: Pilot-RC Wingbags

Specification:
Model: Trainer
Wingspan: 90in (2,290mm)
Length: 58.2″in(1,480mm)
Wing area: 1,237sq in (7,980sq cm)
Weight: 11.99lbs (5.45kg)

Scroll to Top