Ultra-compact, ultra-lightweight six-channel receiver exploiting MULTIPLEX 2.4 GHz M-LINK technology: ideal for use in very small and micro-models. The RX-6 light MLINK is fitted with JST connectors, which are in widespread use for indoor models. In terms of circuit technology it is identical to the RX-5 light M-LINK, and therefore a good, reliable choice for outdoor flying with the smaller model.
• HOLD / FAIL-SAFE function
• Integral button and LED for:
Operating status information
Size and weight can be reduced further: If there are only 4 channels required the outer receiver case can be removed. By cutting off the servo-plug-bench the size and weight will be reduced to approx. 25 x 13 x 7 mm / 1.7 grams. For technically experienced modellers further modifications are possible to make the rx even smaller and lighter. The receiver.pc-board can be shortened / all the serrvoplugs disconnected and and servocables soldered directly to the pc-board. A physical size of 21 x 13 x 2.5 mm with just 1.3 grams can be realized. But still all 6 channels can be used.
WARNING: Any modification will invalidate manufacturers warranty!!! It should only be carried out by experienced electronic technicians.
Accessories: Servo lead, 10 cm (Micro) # 8 5140
|Servo channel count:|| 6|
|Reception system:|| 2.4 GHz FHSS (Frequency|
|Hopping Spread Spectrum)|
|Operating voltage:|| 3.5 … 9.0 V|
|Power supply:|| 4 - 5 NiXX cells, 2S LiPo / LiIo|
|Operating temperature range:|| -20°C … +55°C|
|Dimensions (L x W x H):|| excl. aerial approx. 30 x 14 x 8 mm|
|Weight approx.:|| 3.3 g (1.9 g excl. Case)|