XFLY Twin 70mm B-1B Lancer

£649.00

SKU: XF112P Categories: ,

 

The B-1B Lancer RC model is a highly detailed and realistic replica of the legendary B-1B Lancer strategic nuclear bomber flown by the U.S. Air Force. With 8 operable channels, including Aileron, Elevator, Throttle, Rudder, Retracts, Flaps, Sweep Wing, and an optional Reverse Thrust, this model provides hobbyists with full control over all its flight systems. The scale functional large swept wing, designed for optimised high-speed and low-speed flights, combined with the “Galaxy-X7” 70mm 12-blade EDF system, results in fantastic performance with virtually instantaneous throttle response. The scale retractable shock-absorbing metal landing gears, complete with sequenced gear doors, and the factory-installed LED navigation and landing lights, add to the realism of the model. The scale functional flaps improve the takeoff and landing, while the integrated wing connectors provide easy installation or removal of main wings. The model is fast and easy to assemble with no glue required, and includes a Pulsar 3-Axis Stabilization Gyro System for improved stability and control. The durable EPO flex foam construction makes this model both lightweight and impact resistant.

Features:
8 operable channels (Aileron, Elevator, Throttle, Rudder, Retracts, Flaps, Sweep Wing, Reverse Thrust(optional))
Scale replica of the legendary B-1B Lancer strategic nuclear bomber nickname “B O N E” flown by the U.S. Air Force
Scale functional large swept wing for optimised high-speed/low-speed flights
“Galaxy-X7” 70mm 12-blade EDF system with 6S-compatible high-RPM brushless inrunner motor and 80A ESCs deliver fantastic performance with virtually instantaneous throttle response
Scale retractable shock-absorbing metal landing gears with sequenced gear doors
Factory-installed LED navigation and landing lights
Scale functional flaps for shorter takeoff and landing plus improved slow-flight performance
Integrated wing connectors for easy installation or removal of main wings
Fast and easy assembly – no glue required
Included Pulsar 3-Axis Stabilization Gyro System
Constructed of durable EPO flex foam

Specification:
Wingspan 1776mm/69.9in extended, 1140mm/44.9in retracted
Overall Length 1920mm/75.6in
Flying Weight Approx 5000g (11 lb)
Wing Load Approx 130g/dm2
Wing Area 37dm2
Radio 8 channel
CG 48mm from the leading edge
Drive System Two 3060-KV2200 motors
EDF Diameter Two 70mm (12-blade impeller)
Servo Five 9g + Three 13g + One 25g
ESC Two 80A (XT-90 connector)
Retract System Servoless metal retracts w/ trailing link suspension struts
Stabilization System 3-Axis Gyro
Recommended Battery 22.2V 6S 5000mAh~6000mAh ≥40C Li-Po
Assembly Time 20 minutes

 

Scroll to Top