Arrows Bigfoot PNP with Vector Stabilisation

Original price was: £239.99.Current price is: £208.69.

SKU: ARR010P Category:

Arrows Bigfoot 11 x 7 (2-BLADE) Propeller

Hi-Energy Extreme Lipo 3S 2200mAh 50C XT60

Overlander Lipo 2200mAh 3S 11.1v 35C Supersport - XT60

Offering all season, all terrain, all-round performance this is one model that has something to offer everyone. Easy to fly, docile, sedate and tough, it’s a perfect training platform for beginners; just reduce the rates, go easy on the power and it’ll look after your circuits and bumps all day long. But that’s only the half of it, if you up the rates, bang the sticks in the corners and give it beans, there’s almost nothing that this versatile high-winger won’t do. From hovering to wild aerobatics and even knife-edge it really is a model with a flight envelope that’s waiting to be explored. And, of course, tundra tyres, big flaps and plenty of power give it an everyday bung in the boot versatility that’ll have you reaching for your Bigfoot time and time again, particularly when other models seem a little too much hassle. Presented in a pseudo Cessna 150 colour scheme and sporting a full suite of landing and navigation lights this capable STOL machine comes with the Vector three-mode (auto levelling, wind damping or OFF) stabilisation system offering beginners and experts the flexibility to enjoy this superb aeroplane to its full.

Spanning 1300mm, taking a basic 6-channel radio and using a humble 3S 2200mAh battery it’s light on cost too, not least because it comes fully equipped with a powerful brushless outrunner, ESC, servos and pre-connected flying surfaces. Into the air within minutes of opening the box there’s little to stand in your way of owning (arguably) the finest foamie sportster on the market.

What’s in the Box
  • 1x Factory assembled and painted fuselage with pre-applied decals.
  • 1x Factory assembled and painted 2-piece wing with decals applied.
  • 1x Factory assembled and painted tail set with pre-applied decals.
  • 1x Pre-installed 3536 850KV motor.
  • 1x Pre-installed 30A ESC with XT60 connector.
  • 1x Undercarriage unit with wheels.
  • 1x 2-blade propeller (11 x 7″).
  • 1x Carbon wing spar.
  • 1x Screw and pushrod set.
  • 6x Pre-installed high quality 9g servos.
  • 1x Y-lead and strut clip set.
  • 1x Comprehensive instruction manual.
  • 1x Pre-installed Vector gyro stabiliser unit.
Needed to Complete
  • 1x 6-channel transmitter and receiver combo.
  • 1x 3S 2200mAh LiPo.
  • 1x 3S compatible LiPo balance charger.

 

 

 

Scroll to Top